What Are The Best Ways To Cut Metal Panels Without Leaving The Site?

Steel panels or metal panels are so intense, and cutting this stuff without leaving the site is quite difficult for the construction engineers but not impossible. If you are also thinking of doing this task quickly, you must use some hacks and tips. However, plenty of factors are responsible for completing this task because it depends on the engineer’s method choice and the circumstances of your site. If you are thinking of completing the task of metal removal from the panel, then there are many methods and procedures to complete this task, including the tools or advanced equipment.

Engineers or site owners who don’t know about these tools and protocols must read this blog to understand the methods. Don’t forget to maintain the quality of the panel while cutting the meta from the panel because sometimes, to complete this task without leaving the site, professionals forget to maintain the quality. However, getting the assistance of Commercial Metal Building Contractors is the right opportunity for individuals and companies to complete this task efficiently without any errors.

1). Eradicate Metal from Roof Panels

In this blog, first, we will talk about eradicating metal from roof panels because this process is quite different from the other metal removing processes. First, you need to know about the type of wall and metal roof panels, and here you need to understand the quality type in which these two things are made.

You can also cut metal from roof panels using innovative advanced tools. While cutting the metal, it is crucial to secure the surface of steel edges.

2). Cut On The Ground

One more thing you need to know here is to cut the metals on the ground because with this, you can get the best results in the finishing after cutting metal from the roof panel. The primary reason to consider metal cutting from the ground rather than the top is debris particles from the steel, and these particles are also known as SWARF. If you cut metal from the top, it may also affect the conditions of panels and become the reason for permanent staining.

3). Tools to Cut Metal Panels Without Leaving Job Site

One of the main problems behind the engineers is cutting metals from panels without leaving the job site. Most Commercial Metal Building Contractors are doing this by using advanced tools and methods. These tools are used for metal wall panels or roof panels.

Tools used for this process are Snips, Nibblers, or Shears. However, you can also use abrasive blades, saws, torches, and grinders for the same objective.

4). Type of Tool Used By Commercial Metal Building Contractors

The engineers need to use the correct tools for cutting metals from the roof on-site because they can’t complete the task appropriately. The type of tool depends on the type of material, and choosing an inappropriate tool for the metal may cause damage to the roof and material.

5). What is Aviation Snips?

If you are working on the job site, where minor cuts are required, then you can also use the aviation snips because these snips are mainly used for the small sites to cut the small metal panels. This tool can be used for both red and green roofs. There are two types of snips or aviation snips that you need to know: red and green. Red is for the curves to the left, and green is for the cut curves to the right.

6). Electric Shears for Longer Cut in the Steel

On the other hand, one more advanced tool used by Commercial Metal Building Contractors is Electric Shears. This tool is mainly for the more extended cut in the steel, which is not possible with aviation snips. Hence, make sure that you use this tool for the correct cutting process. Electric Shears can also cut the one-fourth metal part off the panel. With this, you can get a smooth finishing in the flat edges.

Final Words to Know

These things are helpful to cut metal panels without leaving the site, but the metal shears and Nibblers are also effective for this goal. Metal shears are mainly used for the bevel cutting of a standing seam panel. Most of the time, engineers and construction companies are looking for intelligent approaches to complete this task because leaving the site means consuming more time to complete the job. Using intelligent tools and methods to cut metals from the panels is helpful for the construction companies to complete services for the clients in less time.