How Do I Troubleshoot My Water Heater in Mesquite, TX? 

Water heaters are essential for providing hot water for showers, washing dishes and clothes, and cleaning. When something goes wrong with your water heater, it can be a huge inconvenience! Fortunately, there are some troubleshooting steps you can take to identify the issue and get back up and running quickly.

In this article, we’ll provide 10 tips on how to troubleshoot your water heater in Mesquite, TX. With these tips in hand, you should have all the information you need to diagnose and resolve most common issues.

1) Check the power: Make sure that the power is turned on at both the circuit breaker panel and at the water heater itself. If either one is off, turn it on and see if the heater starts working again.

2) Check the thermostat: Make sure that the water heater’s thermostat is set to an appropriate temperature. If it’s too low, you won’t be getting hot enough water.

3) Check for clogs: Clogs can cause all kinds of problems with your water heater. Look for signs of blockage in the pipes or hoses leading to and from your water heater, as well as around the heating element itself.

4) Test for sediment buildup: Sediment buildup can reduce efficiency and cause your water heater to work harder than necessary. To check for buildup, drain a few quarts of water from the tank. If it’s cloudy or if you spot a lot of sediment, you may need to flush the tank and remove any buildup.

5) Test for leaks: Look for signs of leaking around the base of your water heater. This could indicate a problem with the gasket or other parts. You may need to call in a professional plumber if you can’t locate the source of the leak.

6) Inspect the heating element: If your water isn’t getting hot, it could be due to a faulty heating element. Try testing the continuity with a multimeter, or calling in a professional who is familiar with electrical systems.

7) Check for corrosion: Corrosion on parts such as pipes, valves, and tank connections could cause serious issues for your water heater. If you suspect that corrosion might be an issue, you should contact a qualified technician to inspect and repair any corroded parts.

8) Test for gas leaks: Gas-powered water heaters can be particularly dangerous if there is a leak. If you smell gas, evacuate the area immediately and call your local utility company for help.

9) Check the pressure: A water heater’s performance is affected by the incoming water pressure. Test your home’s water pressure with an inexpensive gauge to make sure it’s within the recommended range.

10) Monitor its performance: Pay attention to how your water heater is functioning over time and be on the lookout for any changes in efficiency or performance that could signal a problem.

Following these tips should help you troubleshoot the most common issues with your water heater. However, if you ever run into an issue that you can’t resolve yourself, don’t hesitate to contact a qualified technician for help.

If the issue is beyond repair, the pros may suggest options such as: replacing the water heater, installing a new anode rod, or even a new tankless water heater installation in Garland, TX! Whatever you decide, be sure to do your research and get quotations from several professionals before making any decisions.

What Are The Signs You Need A Water Heater Replacement?

If your water heater is more than a decade old and you’re having recurring problems, it may be time to consider replacing it. The following are some other signs that you need a new water heater:

• You notice rust in the tank or on the pipes
• Your utility bills have gone up significantly
• Your water takes too long to heat up
• There are odd noises coming from the unit
• You run out of hot water quickly
• There is visible corrosion around the unit

If any of these signs sound familiar, it’s probably time to get a new water heater. Contact an experienced professional for help with installation and to discuss all options. At James Armstrong Plumbing, we can help you find the best water heater for your needs in Mesquite, TX. Call us today at 863-557-4608 for more information! We’re here to help.