Easy Guide: How to Crack Nintendo Switch 8.0.1 With/without Xecuter SX Pro?

Recently more and more players use Xecuter SX Pro and SX OS to hack Nintendo Switch 8.0.1 without any risk for free gaming. Do you want to know this secret of jailbreaking ? Then what is Xecuter SX Pro and OS? How to hack Nintendo Switch 8.0.1 if without sx pro/os ? Below we will show you the answers.

What is Xecuter SX Pro and OS ?

Xecuter SX Pro is a USB dongle and tool for booting SX OS on your Nintendo Switch. It is developed by Team Xecuter to crack Nintendo Switch to play free games. We can take advantage of them to boot Team Xecuter’s custom firmware on all Nintendo Switch without firmware and regions limit. It is very easy to use and without any risk. It can inject the CFW on the original firmware of the Switch from a USB key, and we can play pirated games on it. Xecuter SX Pro is designed for the beginner who does not want complicated operations. Indeed, the SX OS software license is the most important part included in this package, the key feature of this SX OS is the backup installed on the microSD card to use the CFW created by itself.

Hack Nintendo Switch 8.0.1 without paying.

This is the free method to take this approach, you don’t need to buy anything, but you should download a lot of files and you are at your own risk for bricking or banning your Nintendo Switch console. Please consider twice before you choose a free way. This operation is not without risk. If you are not sure what you are doing, you could short-circuit components. You will have to redo the process each time you restart the console.

Prerequisites.

• A Nintendo Switch console
• A micro SD card (32GB minimum)

If 8.x.x, the format is exFat. If 4.x.x and lower, the format is FAT32.

• USB cable type A to USB type C.
• A PC

Files to download.

TegraRCMGUI download site: https://github.com/eliboa/TegraRcmGUI/releases

The bootloader:

• Hekate download site: https://github.com/CTCaer/hekate/releases
• ReiNX download site: https://github.com/Reisyukaku/ReiNX/releases
• SDFiles download site: https://github.com/tumGER/SDFilesSwitch/releases

Guide to install homebrew

Step 1: Downloading and preparing tools.

1. Download the archive hekate_ctcaer_x.x according to the version of the Switch.
2. Unpack the archive and keep bin hekate_ctcaer_x.x on your PC.
3. Insert your SD card into your PC.
4. Uncompress the SDFilesVx archive at the root of your SD card.
5. Download TegraRCMGUI on your PC. It will serve you to start the RCM mode. Do not put on the SD card.
6. Insert your SD card into the Switch.

Step 2: TegraRCMGUI and RCM Mode.

1. Unpack TegraRCMGUI.
2. Start TegraRcmGUI.exe.

You will probably need to install the driver. To do this, connect your Switch to RCM mode before installation.

1. Plug the switch into your PC without the joycons.
2. Turn it off.

Switch to RCM mode Via 2 methods.

It is necessary to make a circuit-circuit at the right Joycon rail between pin 1 and 10.

Method 1: With a trombone.

• Take a paper clip.
• Cut out with cutting pliers so that it looks like a U.
• Place the (in the direction of a U upside down) in the notch at the bottom of the right joycon rail.
• Make contact between pin 1 and 10 (a little difficult to succeed).

Method 2: With a JIG.

Slide it into the rail to make contact between pin 1 and 10. 5.Once done, launch your Switch in RCM mode. 6.Press and hold the Volume + button and press the power button briefly. Hold down the Volume + button for a few seconds. If you do not see the logo Nintendo display after 2/3 seconds, your Switch was successfully launched in RCM mode.

Step 3: Launch the bootloader and HBMenu.

1.TegraRCMGUI tells you that you are in RCM mode

2.Select hekate_ctcaer_x.x.bin Note: The x.x corresponds to the version.

3.Click on Inject Payload. Your Switch should restart on the CFW Atmosphere via Hekate. It’s a compiled Bootloader to launch HBMenu.

4.Click on the Album Applet to launch the Homebrew Menu. That’s the end of the free Nintendo Switch hack, and for a complete tutorial, you can find out here.

Summary

This solution is free to hack Nintendo Switch. You will need to use an unconventional method that could make you think before acting. It will be, to trigger the exploit, to make boot the console in a mode Recovery (RCM) using a driver. If you are not comfortable with this method, be aware that there are two possibilities, one using a JIG (plastic object printed in 3D with a built-in conductor) or another, with a modified paperclip. I do not advise welding. Whatever the object used, they will make contact with pin 1 and 10 of the console to trigger this mode.

EASY Guide How to hack Switch 8.0 with sx os pro ?

Pre requisites:

• 1 Switch compatible with hack version 8.0.1 maximum
• 1 Xecuter Sx Pro
• 1 micro-sd card in exFAT format
• 1 pc equipped with a reader / SD card adapter

1) Prepare the Switch before installing the Sx Pro.

• If your switch asks for an update when you insert your micro-sd in exfat you can do the update now in network then do not forget to erase your network parameters and put it in plane mode then proceed to step 2
• If your switch already knows how to read the exFAT you can go directly to step 2

2) Preparation of the SD card

• Connect your micro SD card in exFAT (if you followed the tutorial of step 1) on your PC
• Download the latest OS from the official Sx Pro website in Download (currently 2.7.1) compatible with the 8.0.1 update
• Extract the SXOS archive v2.7.1.zip, you will find the boot.dat file
• Put the boot.dat file at the root of your micro-sd

3) Installation and activation of the Sx Pro license

1. Plug your micro-sd into the switch
2. Charge the dongle by plugging it into the Switch’s USB on, the dongle turns green quickly (5 seconds) which means it’s loaded to inject the hack at startup.
3. Turn off your Switch.
4. Place the Jig on the right side of the Switch
5. Hold Volume + and then press Power button quickly while holding Volume +
6. A Sx Os screen should appear, select Boot Custom FW ==> Continue ==> Continue (If the console remains on the black screen you will have to turn off the console by holding the Power button for more than 20s then try again with the Vol + and Power manipulation)
7. Wait until you start the interface and turn off the Swich
8. Unplug the micro SD card and plug it into your PC
9. Copy the license-request.dat file generated in your micro-sd into your PC
10. Return to the Sx Pro website and click on Activate SX OS
11. Click Browse and then select your license-request.dat file
12. The server sends you the license.dat activation file to be placed at the root of your micro-sd
13. Place your .xci or .nsp games at the root of your micro sd or in the / switch / xci and / switch / nsp folders
14. Reconnect your micro-sd in your Switch and start it with the dongle + Jig + Volume + and Power key combination
15. Once the console in the interface, you can unplug the jig and the dongle and put your controller back and plug it into the dock.
16. You should see your games appear by entering the Switch album
17. Congratulations and have fun

Conclusion on this way of hacking your Switch with the SX PRO

Forced to recognize that this solution is very effective; by its implementation very easy but also by its stability, because the games work like the originals, there is no display or slowdown bug. In addition this product is evolutionary in time, as long as the Xecuter team will update their SX Pro, the dongle will still be usable. Also, the product is distributed internationally in online stores as physical, the reputation of the creators is really very credible, so, hat down!

Where to buy Xecuter SX Pro and Xecuter SX OS?

The best choice is Mod-Switch.com. We are the official seller that you can buy Xecuter SX Pro and Xecuter SX OS in Europe. You could make the purchase at our shop without worries. We offer you the best service before and after sale. We also support free shipping to any country in the world. Do not hesitate to make a purchase with us.