So, on that note, if your furnace seems to be broken, check theguide belowto see if you could fix the problem or if you need an expert in furnace tune-up. Places like Salt Lake City have many furnace repairmen who could help you in case you need a professional for the job.
There’s always a debate on whether you should repair your appliances or have a professional do it for you. Some prefer to fix things themselves because hiring someone could be expensive. But, some machines are too complicated that repairing them on your own could lead to more damages.
Dirty air filters: Do it yourself
If your furnace doesn’t seem to be warming up your home, check your air filters right away. Often a dirty air filter is a cause for a furnace not working correctly. If this is the case, it’s an easy fix, and you can do this yourself.
Read your furnace’s manual and see what kind of filter it needs. Visit the nearest hardware store and buy the appropriate filter. Follow the manual instructions on how to replace your old filter.
Yellow pilot light: Hire a professional
Do not attempt to fix your furnace if you see that the pilot light is yellow. Move away from the machine immediately and leave the room. This light could mean that there’s a leak inside your machine and that carbon monoxide is slowly spreading in your basement.
You can check the surroundings for more signs of carbon monoxide leaks. Make sure that you cover your mouth with a mask or a clean rag. Carbon monoxide poisoning is quite dangerous. The longer you stay near your furnace, the more likely you’ll suffocate. Anyway, signs of carbon monoxide leakage are soot covering your furnace, condensation on the basement windows, corrosion on your pipes, and no chimney draft.
Broken thermostat: Do it yourself
If you notice that the room is colder despite fiddling with the thermostat controls, recheck your device to see if it’s working. Sometimes, the thermostat is the only broken tool in your furnace system. If that’s the case, then this will be an easy fix.
Check your thermostat if it still displays the temperature of the room and other details. If it’s working, then set it to hot and adjust the room temperature to five degrees. Doing this should activate the furnace in your basement, and your room should feel warmer in a few minutes.
If the thermostat is not displaying any details, the batteries may be old. Replace the batteries and adjust the room temperature to your desired level of warmth.
Unusual noises: Hire a professional
If you hear weird noises coming from your furnace, chances are some of its components are too old that they’re starting to break down. A professional should take care of this job since the internal components of a furnace or any HVAC are too complicated for an amateur. Also, you might damage your furnace more if you try to fix it yourself.
This short and straightforward guide can help you figure out if you can fix your furnace or hire a professional to do it.
You may like this